Need help, making sg

[reanbogernls]

im totally new at this so please bear with me =D
i got vol/tone pots and toggle and humbuckers but i do not know how to solder them correctly. i looked at the stuff on seymour duncans site but my pickups and those are different and i also looked at . i looked at schematic tutorial but still confused so i took pictures of my parts and hope you guys can help me out ^^


for the humbuckers, the white wire is posite so the no colored one im guessing is neg/ground
i hope the pics would help you guys explain things to me and the tone pots are the ones with the green thing on the side o.o

[wolf]

Hi reanbogernls and welcome to the board.

For what you want to do, go to this page on my website:
www.1728.com/guitar.htm
and look at the second diagram from the top of the page.

[vonFrenchie]

There are 2 ways to wire an SG/LP

There is this one
My personal favorite.

And then there is this one


All you have to do is wire the white wire to the appropriate lug and the wires on the outside to the case of the pot.

P.S.
Lucky... I've always wanted to build an SG. It's lookin good.