Let's Get Started

Custom Pages

The Google Translate function has been provided as a courtesy/convenience.
However, we respectfully insist that all posts be made in English.

Trying to shield pickups DAN ELECTRO GUITAR

new

« Prev
1
Next »

coolbreeze1
Rookie Solder Flinger

Posts: 1
Likes: 0

Trying to shield pickups DAN ELECTRO GUITAR Sept 10, 2006 11:48:46 GMT -5

Reply Quote

Post by coolbreeze1 on Sept 10, 2006 11:48:46 GMT -5

Any advice on how to shield the sigle coil pickups in a DAN ELECTRO GUITAR with two "lipstick" type pickups?
I found detailed info at guitarnuts2.proboards.com/page/gn1-pages for shielding either a strat or a telecaster guitar. Can I follow instructions for the tele? when shielding a dan electro?

UnklMickey Certified Guitar Nut "...these go to eleven." Posts: 2,621 Likes: 3	Trying to shield pickups DAN ELECTRO GUITAR Sept 11, 2006 9:36:29 GMT -5 Reply Quote Select Post Deselect Post Link to Post Member Give Gift Back to Top Post by UnklMickey on Sept 11, 2006 9:36:29 GMT -5 the pickup wiring on a Dano will be very different. most guitars are wired with the pickups in parallel. Danoelectros are wired with the pickups in series unk
	"Silence is golden, but duct tape is silver. " -- Steve Hopton "some people say happiness is just a State of mind...................... i think it should be a whole freakin' Country!" -- unklmickey

Wiring Introduction	Magnetic Pickups
Quieting the Beast	Shielding a Tele
Fat Penny Amp	Little Giant
Shock Hazards	Bucket o' Noise
Treble Bleed	Mike Richardson Wiring
Troubleshoot a Strat

Trying to shield pickups DAN ELECTRO GUITAR

Post by coolbreeze1 on Sept 10, 2006 11:48:46 GMT -5

Post by UnklMickey on Sept 11, 2006 9:36:29 GMT -5