elvenfoot
Rookie Solder Flinger
Posts: 1
Likes: 0
|
Post by elvenfoot on Oct 24, 2006 20:57:31 GMT -5
Hello
I got a stratocaster that uses a HSS system with 2 tones, 1 volume and a push-pull on the Humbucker.
I wanna add on my guitar an EMG-SA with a own tone and volume control (while the EMG is active its best to use tone and volume especially made for it).
What i wanna do is, add a kind of switch system on my guitar, with a push-pull control, so that i can choose whenever i want to use the passive or the active, but never both together!
Thanks for helping
|
|
|
Post by UnklMickey on Oct 26, 2006 16:39:53 GMT -5
hi Elvenfoot,
welcome to GuitarNuts2.
i'm really surprised no one replied yet.
that should be VERY simple.
all you need to do is wire the output of the volume control (that currently is wired to the output jack), to one of the throws of the new switch.
the wire from the output jack connects to the pole.
the output from the EMG connect to the other throw.
cheers,
unk
|
|