Post by ChrisK on Jul 26, 2007 12:38:29 GMT -5
www.glguitars.com/frameset.htm
Well, it has the switches, perchance it needs meaningful switching.
Of course, having the ability to select each pickup for either half coil (as in upper or lower three strings) or both sets (gasp!, the inhumanity of it all) leaves me reaching for.................uh................er............meaning.
I guess that it makes it easy to wank away indiscriminately on three strings if'n yer a ceegar box geetar aficionado.
Not much room for the wide toggles (KA and all).
The ToggleCaster may fit......
guitarnuts2.proboards45.com/index.cgi?board=schem&action=display&thread=1138841439
...if I replace the middle 3PDT with a DPDT and leave one middle wire hanging on the bridge pickup side. Bridge and neck parallel/out/series, middle in/out, phase for two, and drive mode select will nicely consume all six switch locations. Hmmm, now what trouble can we get into with three push/pull pots?
?
Well, it has the switches, perchance it needs meaningful switching.
Of course, having the ability to select each pickup for either half coil (as in upper or lower three strings) or both sets (gasp!, the inhumanity of it all) leaves me reaching for.................uh................er............meaning.
I guess that it makes it easy to wank away indiscriminately on three strings if'n yer a ceegar box geetar aficionado.
Not much room for the wide toggles (KA and all).
The ToggleCaster may fit......
guitarnuts2.proboards45.com/index.cgi?board=schem&action=display&thread=1138841439
...if I replace the middle 3PDT with a DPDT and leave one middle wire hanging on the bridge pickup side. Bridge and neck parallel/out/series, middle in/out, phase for two, and drive mode select will nicely consume all six switch locations. Hmmm, now what trouble can we get into with three push/pull pots?
?
