|
Post by ijustwannastrat on Sept 17, 2009 20:43:06 GMT -5
I'm being puzzled. I have a HB/SC guitar. I want the SC to have a tone control, no tone on the HB, and a master control. 3 way switch, with the middle position a combo. From there, I can edit in my mods. Anybody want to help with this?
|
|
|
Post by JohnH on Sept 17, 2009 21:46:27 GMT -5
Just do a standard two pickup 1vol 1tone 1 toggle design, such as you can find at Seyour Duncan for example. But move the tone control so that it is hard-wired directly to the SC pickup. It will then work in SC and combo modes, but not in Hb mode.
John
|
|
|
Post by newey on Sept 17, 2009 22:33:14 GMT -5
Here's what I came up with, I'm pretty sure it's right but not 100% certain.
|
|
|
Post by ashcatlt on Sept 18, 2009 1:03:19 GMT -5
That'll do it.
Of course, the "neck tone" will act as a master in the middle (both in parallel) position. Don't know that this can be avoided, though I think you can reduce this action by "isolating" that tone pot behind a volume control.
|
|