|
Post by flateric on May 19, 2010 10:13:55 GMT -5
Quick sanity check please! Wiring a DPDT on/on/on switch with 2 caps to give 3 different values, 1 or 2 or 1+2. I think this is correct: What if it is an on/off/on type switch?
|
|
|
Post by flateric on May 19, 2010 10:32:02 GMT -5
I think this should work for the on/off/on DPDT switch, but in this case the 2 caps are in series, not parallel when the switch is in the mid position
|
|
|
Post by flateric on May 19, 2010 10:32:26 GMT -5
Sorry i'm just sort of rambling aloud here, thanks for listening.
|
|
|
Post by newey on May 19, 2010 10:39:38 GMT -5
|
|
|
Post by flateric on May 19, 2010 10:56:14 GMT -5
Aha! Thanks Newey, i knew someone more intelligent would have posted something more comprehensive here before about this item.
|
|