imashark
Rookie Solder Flinger
Posts: 1
Likes: 0
|
Post by imashark on Nov 17, 2010 16:14:21 GMT -5
Im sure this has been aswered somewhere, but I am having issues where to sauter the ground wire and where to wire the jack. any help?
|
|
|
Post by irwired on Nov 17, 2010 19:03:04 GMT -5
Hello and Welcome to the nuthouse ;D Could you post some pictures or a diagram of the wiring so we have some more information to go on. There are many knowledgeable people here who would be glad to offer advise. the more specific you can be the more useful the advise Cheers IRW
|
|
|
Post by newey on Nov 17, 2010 19:36:36 GMT -5
Shark-
I second the Welcome!
But IRW is right, we'll need some more info.
The DM EVO is, I believe, a 4-wire HB with a bare shield wire. If, by the "ground" wire, you mean the bare wire, then it goes to wherever the grounding point on the guitar is located-usually the back of one of the pots.
If the pickup is going into an existing guitar, I don't know what you mean by "where to wire the jack". Isn't it already wired?
If not (meaning that the wiring is not currently in a functional state), then where the jack gets wired depends on the layout of the switching and pots- and we'll need photos or a diagram of the components involved to answer that question.
|
|