|
|
Post by cosmiccharlie9 on Jul 9, 2005 1:01:21 GMT -5
I have a 2005 Bigsby MIJ 50's Tele. I want to put a 4-way switch and replace the pups with Seymour Duncan Vintage Stacks. I can't find a wiring diagram or schem that incorporates the 5 wire pups and the 4 way. I am somewhat comfy with basic electronic applications but I'm having trouble with this. If any one has a diagram I could follow it would pretty much make my year.
|
|
|
|
Post by CheshireCat on Jul 9, 2005 4:47:49 GMT -5
I have a 2005 Bigsby MIJ 50's Tele. I want to put a 4-way switch and replace the pups with Seymour Duncan Vintage Stacks. I can't find a wiring diagram or schem that incorporates the 5 wire pups and the 4 way. I am somewhat comfy with basic electronic applications but I'm having trouble with this. If any one has a diagram I could follow it would pretty much make my year. Do you have any pics, diagrams, or links to help us see what you are talking about or wanting? |
|
|
|
Post by cosmiccharlie9 on Jul 9, 2005 7:59:39 GMT -5
I want to the 4 way to run
Pos 1 - Bridge PUP
Pos 2 - Bridge & Neck pup in parallel
Pos 3 - Neck PUP
Pos 4 - Bridge & Neck in series
SEYMOUR DUNCAN pups have a red, white, green, black & bare wire. Their site has diagrams but none incorping all of the elements involved. I'm using 250K no load fender pots and a fender 4 way switch. I would like to run the pups as stacked humbuckers rather than hot single coils unless someone can convince me otherwise.
|
|
