feikman
Rookie Solder Flinger
Posts: 1
Likes: 0
|
Post by feikman on Feb 16, 2017 12:28:02 GMT -5
Hi guys,
I am trying to mod my strat to the following: - normal five way switch - three pickups - two volume controls (one for the bridge, one for neck & middle, bridge pickup is a SD SH-4 JB with push-pull coil tap), no tone control - one kill switch
I have a John Hewitt diagram which comes close but it does not work (perhaps I do something wrong, perhaps it is because the diagram also has a tone).
Does anyone have any suggestions how I can wire my strat?
Many thanks
Feiko
|
|
|
Post by newey on Feb 16, 2017 16:14:04 GMT -5
Hello and Welcome to G-Nutz2!
This makes it sound like you have already wired the guitar in some fashion, and now need to troubleshoot a wiring issue, rather than starting from scratch to wire the guitar with a new scheme. Do you need design help or troubleshooting help?
First, which of John's diagrams are you using? (I suspect his "Strat with 2 Volumes" design, but let's be clear).
Second, how is it wired at present? and, what about it doesn't work?
|
|