volcklore
Rookie Solder Flinger
Posts: 1
Likes: 0
|
Post by volcklore on May 23, 2006 20:19:38 GMT -5
I've got a Gibson double cutaway, but it's wired up just like a fat strat(SxSxH). The electronics cavity has been shielded. I'm getting humming from all positions involving mid and bridge pickups. No hum with just Neck pickup on. Wires for the Bridge HB are shielded, wires for mid are not. I'm about to ground the middle and HB cavities. Would I need to ground the bridge(which is a Schaller 456 Fine Tuning Stud Mount Bridge), like on a strat? thanks. -J
|
|