sjw2k3
Rookie Solder Flinger
Posts: 1
Likes: 0
|
Post by sjw2k3 on Jun 20, 2006 8:40:34 GMT -5
Hi, I'm afraid I'm not too good with re-wiring but I was hoping to re-wire my current guitar with a push/pull pot to act as a phase switch. I've had a go at a diagram but I'm unsure whether it's correct. Would anyone be able to offer some advice on it please? Regards Steve
|
|
|
Post by fobits on Jun 20, 2006 18:54:14 GMT -5
Yes, it looks right to me.
There are a many, many ways to wire four coils, as you can see if you look around here a bit. Yours is an easy modification.
|
|