Need ideas for two Push pulls

[darkcyde]

Hi, Well I am redoing my Ibanez again. I just bought two push/pulls to add to it and was wandering what the best combo would be for:

2 humbuckers
2 Push/pull pots
1 on-on-on toggle
1 5-way blade switch

Would like to see what others have done with similar setups

[gfxbss]

here is what i did w/ one push/pull, 2 buckers, two SPDT switches, and a les paul switch.

guitarnuts2.proboards45.com/index.cgi?board=schem&action=display&thread=1165809595

[darkcyde]

Oh, I wanted to mention that I can add another on-on-on if needed.
It would make things to tight (topside) with it but it could be done.
I just want to find a way to get as many combos out of the two HBs as possible.

Guitar specs/Mods:
Ibanez RG 320 QM DX
Stock Ibanez bridge but its been blocked
Sperzel locking machine heads
metal film rear cavity as well as the pickup areas
80s DiMarzio PAF pro in the neck
Stock Bridge pickup
[removed from guitar] I had added a rotary tone switch in middle of the stock vol/tone holes. This left a hole that is now filled with an On-On-On dp switch that is unwired(hole filler at the moment)

This brings us to the two push/pulls. I am wandering if you can get every combo with those and two On-On-On switches? (or at least close)


Thanks in advance for all the help guys!

DC

[darkcyde]

Ok, maybe this will make it easier. I made a quick template for this combo. Please feel free to modify as you see fit, as I could really use the help.

thanks in advance

DC

[borsanova]

Why don't you take a look at my broadbucker design? I've just posted two new schematics that could do for your case.