Blender Pot Mod

[momo]

Hello again.... I just recieved the blender pot from Specialty Guitars to blend the neck pickup with the rest, now I have a wiring question about the Q.T.B mod that I did...

I rewired the wires with the Specialty Guitars diagram included with the pot. This did not change the groung wires but now, the Beast mod does not seem as effective in reducing the noise, I also added a Specialty Guitar bridge metal plate for increased output and also added two small nuts to the bridge height screws to secure the metal plate.
So, does having increased bridge output, increase the noise?, do you think the 2 nuts induce ground problems?, the plate is well soldiered on the groung pup lug.
Does the blender pot create more noise?

Well Ill be waiting for your replies before I reassemble my guit.
thanks for the replies!

[JohnH]

Some more info would be helpful. Can you post any diagrams of the wiring, or of how this plate is installed?

J

[momo]

So everything is OK, so happends that the blender pot was not well grounded. It shipped with 2 washers of different metals I guess,anyway, I took off the washers and snugly set the pot on the pickguard plate and that did it!
thanks for the reply.