spdolan
Rookie Solder Flinger
Posts: 1
Likes: 0
|
Post by spdolan on Oct 12, 2007 14:19:10 GMT -5
Hey folks
I built a custom tele with a buddy last spring and now I want to re wire it. Its got 3 pups, a Duncan 5-2 Tele neck, Cool Rails in middle, Hot Rails at bridge. I want to use p/p pots to split the buckers. 5 way switch.
What value pots and caps would you recommend, and if anyone has a diagram that would be greatly appreciated. The current wiring scheme is complicated - I want to get a few great tones instead of a ton of so-so ones.
Thanks
Dolan
|
|