kennet
Rookie Solder Flinger
Posts: 4
Likes: 0
|
Post by kennet on Dec 6, 2007 4:19:07 GMT -5
Hello
I bought this guitar second hand. Sadly, the wireing is not good: the switches are not connected.
2 humbuckers, 1 volume, 2 tone, 1 phase switch (2 positions) , 1 switch (3positions= pick-ups selection?)
Does anyone have photos or a schematic of a properly wired SB-70?
thanks a lot
Kennet
|
|
|
Post by kuzi16 on Dec 6, 2007 12:06:51 GMT -5
|
|
kennet
Rookie Solder Flinger
Posts: 4
Likes: 0
|
Post by kennet on Dec 6, 2007 13:56:12 GMT -5
nope: this guitar is from 1982. Search engine starts later... thx anyway
|
|
|
Post by ChrisK on Dec 6, 2007 17:58:25 GMT -5
Post pics of the insides and the components (switch bottoms, pickup leads, etc.).
|
|
kennet
Rookie Solder Flinger
Posts: 4
Likes: 0
|
Post by kennet on Dec 7, 2007 6:44:27 GMT -5
well, originaly the pickup on the guitar should be 2 humbuckers. They were replaced by 2 single coils, but that's ok with me for the moment. Maybe one day I'll buy 2 HB, and then I will be looking for the chematic with the HB, lol Inside i see: 2 volume one tone (or 1 volume, 2 tone), 3way swich, phase-switch This is a drawing I made. At this point, only the volume-tone are connected (all 3 of them), and none of the swiches. I would be glad if the swiches were connected in one way or another, to have more 'color' possibilities in the sound, even if it's not the original config of the Ibanez SB-70. greetings
|
|