vaingloria
Rookie Solder Flinger
Posts: 1
Likes: 0
|
Post by vaingloria on Jan 16, 2008 21:35:58 GMT -5
Hey everyone, I'm new to the forum (and wiring mods, but I think I'm starting to get it) and I was hoping someone could take a look at this wiring scheme: It's a modification of this 21-sound scheme for 2 Humbuckers: www.guitarelectronics.com/product/WDUHH3T1103I added a second pot for individual HB tone control and a switch to toggle the HBs in/out of phase (SW4), which should bring the number of possible combinations to 42. Did I get the phasing scheme right? I also plan to merge the tone pots with SW3 & SW4 using push/pull DPDT switches (SW3 push = HBs in parallel; SW4 push = HBs in phase). Anything I should know before I do that? The HBs are Seymour Duncan Invaders on a lower-end Epiphone SG (other mods: scalloped frets 17-22, removed pickguard, deeper cutaway, roller nut & bridge, Bigsby B500 vibrato, Grover locking tuners). Any and all feedback would be greatly appreciated. Thanks!
|
|