emin9
Rookie Solder Flinger
Posts: 8
Likes: 0
|
Post by emin9 on Jan 21, 2008 22:34:16 GMT -5
I came up with this diagram, my first modding attempt. Are there any ugly holes in my plan? Will it explode or send me back to November 12, 1955? Pardon my drawing, those are caps between tone pots and ground. Also ground on "bridge tap" is redundant, I wasnt thinking.  |
|
emin9
Rookie Solder Flinger
Posts: 8
Likes: 0
|
Post by emin9 on Jan 22, 2008 23:12:16 GMT -5
Welp, I'm punting. I wired this up tonight and it's a C-. My position 2 is not working, all I get in position 2 is a mirror of position 3. It isnt horrible, the middle pickup is a new GFS Lipstick tube RW. O/T the GFS Lt sounds incredible! I couldnt be happier and if I had a 3rd guitar I'd try a full set of them.
Anyway, I'm wondering if the issue with position 2 is that the lipstick in the middle is reverse wound. I thought that would help with the hum vs. the neck pup. Dunno, I r noob. Next probelm is my tone pots are acting like volume. In addition I have the same problem as mentioned in another post where the tone at 10 is total mud and 9.9 is clear as a bell. Tone at 0 is 0 volume. I'm guessing I have them wired backwards?
Signed,
Confused and noobish (but thrilled with the GFS tubes ;D )
|
|
