Post by hondavfr800 on Feb 12, 2008 7:05:11 GMT -5
I Did the following wiring on my guitar:
now I'm supposed to have the bridge pickup working with the rest of the pickups (push pull pot), and it works, but the problem is that it sounds thin when I use the bridge + other pickup (mid or neck) and it sounds ok when in "normal" use (i.e neck+mid, mid, bridge+mid, bridge)
Bridge - Dimarzio FastTrack 2 (DP182) (4 wire)
Middle - Dimarzio HS-2 (4 wire)
Neck - Fender Tele "Lipstick" (2 wires)
Guitar is Peavey Predator.
P.S - the wire coming from the volume pot into the 5-way switch is soldered to 2 poles on the switch, slightly different than in the schematic above, AND while previewing this post... I discovered that I forgot to link between the volume pot ground and the tone pots ground.
I'll go back and finish the job... but if you guys have any ideas of what might went wrong or anything, please tell me
That's easy! You've got the bridge pickup wired backwards, compared to the other two. But since it's a 4 wire humbucker, you'll have to consult the DiMarzio color chart to determine which leads to swap around.