sniffin
Rookie Solder Flinger
Posts: 1
Likes: 0
|
Post by sniffin on May 19, 2006 10:47:17 GMT -5
I have an old 1967 GIBSON SG CUSTOM, which I've started bringing back to its original state, with 3 humbuckers. I just bought a 63 PAF and I'm replacing the non original DIMARZIO DP-404(splittable). I opened the back circuit protection plate, and found to my surprise a mess of wires going everywhere. The guitar has been modified to fully support the split dimarzio, 2 additional switches have been put in. Now The guitar has this setup: 3 volumes( 1 for each pickup) and 1 Tone(for all pickups when switched). I've taken out the dimarzio pickup and the additional switches but I really need a wiring schematic to help me figure out a 3 humbucker, 2 tone and 2 volume setup. Has anyone got this diagram? thanx to all
|
|
|
Post by ChrisK on May 19, 2006 11:27:10 GMT -5
Serious guitar, man!
I love the SG Custom, but never could play one well due to too much stuff (pickups) under the strings.
If'n I recall, the three pickup guitars had "hybrid combo's" based on what was realizable with the three way switch.
Send an email to Gib$on and ask them for wiring info.
|
|
|
Post by mlrpa on May 19, 2006 15:40:39 GMT -5
To the best of my knowledege, I believe that it IS a 3 vol, 1 tone setup.
|
|
|
Post by sumgai on May 20, 2006 16:39:30 GMT -5
|
|
|
Post by Ripper on May 23, 2006 16:04:06 GMT -5
Dont you find a guitar with three humbuckers ummmmm, a little busy?
Peter Frampton, and Ace Frehley come to mind.
|
|