greybagz
Apprentice Shielder
Posts: 41
Likes: 0
|
Post by greybagz on Feb 17, 2009 20:50:05 GMT -5
Hi all, So long since I've been here, hope ur all well. I'm currently correcting some wiring issues with an Ibanez RG1570 and the V7 neck pick up is a 4 conductor type with bare shield. Colors are Red, Black, White and Green. My testing results have proved that the Red and Black wires are the north coil of the humbucker, and the White an Green the south coil. I was wondering if anyone had any idea which are the start and finish wires of each coil? The only references to Ibanez V series pickups i can find are the 2 wire types Red and White with bare shield (Red = hot, White = tap, Bare = ground). All the Ibanez wiring diagrams only show this configuration, not the 4 wire. Thanks for your time. Graeme
|
|
|
Post by newey on Feb 17, 2009 21:16:28 GMT -5
Welcome back, Graeme! Someone recently linked to Bill Jehle's article from Project Guitar here. This explains how to determine pickup color coding for an unknown 4-conductor pickup. You may find this helpful.
|
|
|
Post by cynical1 on Feb 17, 2009 22:09:51 GMT -5
This just came up recently in a posting Ibanez s320wk schematic. Based on the somewhat sketchy reference provided there it sounded like the polarity is as follows: | SCREW | POLE | COIL (S) | SLUG | COIL | POLE(N) | Winding/Polarity | Start | Finish | Polarity | Start | Finish | Polarity | Seymour Duncan | Green | Red | South | Black | White | North | Ibanez Humbucker | Green | White | South | Black | Red | North |
Unfortunately, this was never verified. It sounds like newey's posting would allow you to verify that for posterity. Happy Trails Cynical One
|
|
greybagz
Apprentice Shielder
Posts: 41
Likes: 0
|
Post by greybagz on Feb 17, 2009 22:18:58 GMT -5
Newey, Thanks for the heads up, Bill Jehles article hit the nail on the head for me. I knew how to determine north and south coils but had no idea on finding the + and - of each coil. I can now get this Ibanez wired up and sounding normal, previously terrible, not sure who had a go at this before me. For anyone who may require the info someday; Ibanez V7 neck pickup with 4 conductors is as follows North Coil: Red wire +, Black wire - South Coil: Green wire +, White wire -
Thanks for ur help, I'll be in touch with the end results. Graeme
|
|
greybagz
Apprentice Shielder
Posts: 41
Likes: 0
|
Post by greybagz on Feb 19, 2009 5:42:01 GMT -5
Ok, All back together and sounding great. Thanks for the tips again guys. Can always count on the Guitar Nuts. Much appreciated!! Graeme
|
|