Can anyone help with the re-wiring of my Epiphone Les Paul? Over the years of the loosing and tighting of the jack has broken the wires to the jack. I thought it would be an easy solder job. The jack has 2 posts, the wire going to it has an internal jacketed wire and windings around that. I figured one wire to each post. WRONG! I still get nothing out of the guitar. What is the correct wiring pattern? any help would be appreicated. Thanks Terry
Follow the leads in to the cavity, you'll see which one is hot and which one is ground. The interal jacketed wire goes to the tip lug on the jack and the braided wire wrapped around it goes to ground (sleeve lug on the jack). Insert a 1/4" plug to see which lug is tip and sleeve.
Post by StratLover on May 10, 2005 12:11:50 GMT -5
GOOD LUCK WITH YOUR PROJECT !
"Shoot for the MOON you just might miss and hit the STARS"