|
Post by ChristoMephisto on Nov 14, 2010 17:49:41 GMT -5
Due to a shipping error, i ended up with a second SD neck P-rail. Right now i have a Tele with a SD bridge Broadcaster, matching tele Rhythm in the mid, and a P-rail(w/ Triple Shot) in the neck. Would it be too much with a second neck P-rail in the middle instead?
|
|
|
Post by newey on Nov 14, 2010 19:09:40 GMT -5
Ches- Those are the best kind of shipping errors. Asking a bunch of Nutz™ whether something is "too much" is a bit like asking Kirk Hammett if his amp is too loud . . . I'd say give it a go. If your thought is that it might be too much, set it up so that you can split the p-rail to the rail alone. That ought not be too different from what you have now. Although, if major routing is going to be required, perhaps it's more of a project than one needs. Will it fit as is?
|
|
|
Post by ChristoMephisto on Nov 14, 2010 20:12:39 GMT -5
My tele already has an universal routing so that's not a problem. Would probably use another Triple shot pick up ring to ease the switching, and of course a new p'guard at Warmoths
Was just wondering if there was overkill
|
|
|
Post by Yew on Nov 15, 2010 12:01:44 GMT -5
There is always room for more switches on a guitar
|
|
|
Post by ChristoMephisto on Nov 15, 2010 16:40:10 GMT -5
There is always room for more switches on a guitar After two Triple shots, 5-way blade switch, and three push/pulls, don't think I want anymore switches ;D
|
|