jonnyred
Rookie Solder Flinger
Posts: 4
Likes: 0
|
Post by jonnyred on Apr 22, 2011 16:50:57 GMT -5
First, Hello everyone. Im Jonny and this is my first post on this forum.
I would like to rewire my friends Strat(wiring is currently stock other than a treble bleed I added) so that the tone control nearest the volume affects only the middle pickup and the other tone control only affects the bridge pickup. Ive looked at several sites and havent found a schematic.
Any help would be great. Thanks in advance.
|
|
|
Post by JFrankParnell on Apr 22, 2011 17:18:26 GMT -5
see the two wires going to the tone pots? And the empty lug above those two on the 5way? Just shift those wires up a lug, so the bottom one (neck) is now empty. Oh, and if I may do the honors, gentlemen*, Welcome to the forum, Johnny *please note my "sartistic" use of gentlemen
|
|
jonnyred
Rookie Solder Flinger
Posts: 4
Likes: 0
|
Post by jonnyred on Apr 22, 2011 17:55:23 GMT -5
Thanks man!
First, its Friday... Im going to eat dinner. Then its back to my soldering station.
|
|