dannyb819
Rookie Solder Flinger
Posts: 1
Likes: 0
|
Post by dannyb819 on Dec 17, 2011 0:30:00 GMT -5
Hello All!
This my first post here, so my apologies if this has been covered. I did a search, but couldn't find exactly what I was looking for so I decided to register and post.
I'm looking to replace to the Duncans in my guitar with some DiMarzios (Area 61, Area 67, AT-1) and I'd like to wire it in an unconventional, way since I never use the middle single coil on its own, making the 3rd position in the 5-way is therefor rendered useless. The guitar has 1 vol, 1 tone (push-pull for coil tap), 5-way, and mini toggle (2-way).
Here's what I'd like to do: Pos 1: bridge full Pos 2: bridge full + middle Pos 3: bridge + neck Pos 4: middle + neck Pos 5: neck Push-Pull to split bridge Mini toggle to act as kill.
I'm pretty sure I'll need a superswitch, but I'm not sure what do to beyond that. Any and all help is appreciated.
Thanks!
|
|
|
Post by JohnH on Dec 17, 2011 1:27:10 GMT -5
|
|