Post by Cenulab on Jul 5, 2005 11:15:27 GMT -5
Hi all,
I'm planning a custom wiring set-up using a master volume and two "modes" of operation (normal Strat/series combos) and I'd like to use two different tone controls both wired as masters. Simple enough.
I'd like to add a switch to each of these tone controls so each can be assigned to either "mode 1", "mode 2" or both; I can visualize how to do this using a simple SPDT on-on-on switch for each combined with the switch I'll be using for my two "modes".
My question for all of you experienced wiring gurus is,"Will I need to add a cap or resitor to the switches to prevent electrical "pops" when flipping switches?"
Seems to me that I might, just from the info I've picked up from GN2, but I'm not sure how they should be connected.
Help, please! ;D
-Cen
I'm planning a custom wiring set-up using a master volume and two "modes" of operation (normal Strat/series combos) and I'd like to use two different tone controls both wired as masters. Simple enough.
I'd like to add a switch to each of these tone controls so each can be assigned to either "mode 1", "mode 2" or both; I can visualize how to do this using a simple SPDT on-on-on switch for each combined with the switch I'll be using for my two "modes".
My question for all of you experienced wiring gurus is,"Will I need to add a cap or resitor to the switches to prevent electrical "pops" when flipping switches?"
Seems to me that I might, just from the info I've picked up from GN2, but I'm not sure how they should be connected.
Help, please! ;D
-Cen