|
Post by dennyb2009 on Dec 19, 2013 21:37:51 GMT -5
I am building a 6/12 double neck and I am not sure how to wire it properly ? I have not been able to find the schematic on the internet. Any help would be greatly appreciated.
|
|
|
Post by newey on Dec 19, 2013 22:48:31 GMT -5
Sorry, Denny, I had to move this thread from Schematics. The double-neck SG is, in Gibson-speak, an "EDS 1275". There is a schematic in the support area of the Gibson website: www2.gibson.com/Support/Schematics.aspxBasically, the 2 pickups from each neck first go to a 3-way toggle selector to select which pickup is operational. This is a DPDT switch. Downstream from that, each neck is wired to its own V and T pots, and then both sets of pots are wired to a 2-way toggle which selects either the 6 or 12 neck, and then to the output jack.
|
|