popo83
Rookie Solder Flinger
Posts: 1
Likes: 0
|
Post by popo83 on Mar 11, 2014 10:16:07 GMT -5
I am trying to wire my 3 pickup SG in the same way that the Epiphone Riviera P93 (or similar 3 HB guitar) is wired.
3 P90's, 3 way switch, bridge volume, middle volume, neck volume and master tone.
My goal is to get the "traditional" SG/LP configuration (B/B+N/N) minus the one tone control but also have an independent middle pickup volume control.
I've been looking around but for some reason I cannot find a schematic like this.
I'm guessing that Gibson's new Togpot that comes in the Kirk Douglas SG and the SG Deluxe would be wired similarly but it costs about $40. and the loss of one the tone control isn't that important to me.
Thanks for any help on this!!
|
|
|
Post by haydukej on Mar 11, 2014 12:57:43 GMT -5
I found this "reportedly" Epi Riviera p93 diagram. Take it for what it's worth. Edit: Pardon me for not initially doing the welcome statement, hopefully Newey will be along with the "official greeting". By the way, that diagram was the first thing to pop up on searching Google for "epiphone Riviera p93 wiring schematic". Keep practicing your search-fu grasshopper.
|
|
|
Post by newey on Mar 12, 2014 17:41:34 GMT -5
popo83-
haydukej said
Sorry, I'm late to the party here.
Hello and Welcome to G-Nutz2!
If that's the way this is wired, it's a bit odd. The middle volume seems to blend the middle pickup into whatever the toggle is selecting, and even with the middle volume all the way down, the middle isn't out of circuit, so the load is still present.
|
|