Post by roadtonever on Apr 1, 2014 9:24:54 GMT -5
I took apart my 1998 Fender Cyclone for a pickup swap and noticed a 270k resistor at the switch. Since this is a 1HB1SC and at least one of the two pots is 500k I assume this is to provide a higher load for the SC.
Anyway I thought it was a elegant solution so I wanted to share. What I'm wondering at this point is if it's only possible to use the resistor for individual selections?
Anyway I thought it was a elegant solution so I wanted to share. What I'm wondering at this point is if it's only possible to use the resistor for individual selections?