brianloco
Rookie Solder Flinger
Posts: 22
Likes: 0
|
Post by brianloco on Nov 12, 2015 19:05:06 GMT -5
Ok so on a build I'm about to finish I had originally planned on using a p90 a regular sc and a hb. So I bought the switches and everything I planned on using. A 4p6t rotary for the hb a six way switch and a push/pull tone pot and vol pot and drilled the holes for those switches. Well in the course of building I scrapped the middle sc and opted for just the p90 and hb. I know how to wire in the hb to the rotary and to the switch already my dilemma is what to do with the other three positions on the switch. Right now I have 1 n 2 nb and 3 b and the rotary will take care of any other combos within the hb. Is there a way to reverse phase of the p90 on the other 3 positions or any other different schemes anyone could think of or help out with
|
|
|
Post by reTrEaD on Nov 12, 2015 19:38:24 GMT -5
It seems to me you could do a lot just with the 4P6T by itself.
For instance: P-90 alone HB alone (coils in series) HB alone (coils in parallel) P-90 in parallel with HB(coils in series) P-90 in parallel with split HB P-90 in series with split HB
|
|
brianloco
Rookie Solder Flinger
Posts: 22
Likes: 0
|
Post by brianloco on Nov 12, 2015 19:47:02 GMT -5
Yeah I could but if I get rid of the selector switch I end up with an extra hole in the guitar
|
|
brianloco
Rookie Solder Flinger
Posts: 22
Likes: 0
|
Post by brianloco on Nov 13, 2015 15:53:20 GMT -5
I found a 3way switch amongst my things so I wired the p90 to a push/pull for reversing phase and the hb to the rotary so that takes care of that
|
|