Post by monkey hotel on Oct 26, 2016 16:03:13 GMT -5
Greetings from Germany!
I am working on a new wiring using a Megaswitch M. Maybe someone can help?
Here's what i would like to accomplish:
1 - N 2 - N + C2 3 - N + B 4 - N x (B + C3) 5 - B
I`ve seen a related wiring here or on tdpri, but can`t seem to find it anymore. Deaf Eddie has this diagram .
In my wiring experiment, this combination for pos.4 sounded best:
Since there are so many different diagrams available i would like to go for a layout utilizing the fender superswitch. I want to understand the signal path first and will figure out the corresponding lugs later.
I want to use only a few wires, since soldering the Megaswitch requires almost surgical precision.
i would like to go for a layout utilizing the fender superswitch.
So, which is it?
Te Deaf Eddie diagram can be a starting point,you just have to swap the wiring for positions 3 and 4 on the "B" lug of the Superswitch to give you N + B in parallel at position 3, with the series at position 4. Then, you need to add C3 at position 4. Since the Superswitch (assuming that's what you are using has an unused pole, you can simply use that to wire the cap across the bridge pickup.