bjg
Apprentice Shielder
Posts: 37
Likes: 0
|
Post by bjg on Jan 22, 2006 1:12:08 GMT -5
what is the difference between an "off" and a "none" position on a switch. sutch as in "on-off-on" or "on-none-on"
also does it make much of a difference which kind i use for the series/parellel selection in the tonemonster mod?
|
|
|
Post by Mini-Strat_Maine on Jan 22, 2006 15:11:58 GMT -5
what is the difference between an "off" and a "none" position on a switch. sutch as in "on-off-on" or "on-none-on" I bought some of the Alectron 250-3113 3PDT (9 terminal) ones from Allied Electronics. It turned out that the "none" means "no center detent." If I'd read , I'd have known that before I played with the toggles and thought I'd been sent the wrong switches. Only in that an on/off/on could give you no signal in one position, which would be okay if you wanted a "standby" (kill switch).
|
|