kullboys
Rookie Solder Flinger
Posts: 1
Likes: 0
|
Post by kullboys on Feb 21, 2018 2:48:48 GMT -5
Hello everyone Alright, this was for an epiphone les paul special. I took out the tone pot. replaced the vol pot w/ a push/pull. the push pull is a phase switch. then i have two SPDT switches for coil tapping. it sounds great, and is very versitile. have fun. Thanks
|
|
|
Post by newey on Feb 21, 2018 6:42:22 GMT -5
kullboys-
Hello and Welcome to G-Nutz2!
Sorry, but I had to move your post from the schematics section. I'm glad you found a wiring scheme to suit you. Did you use the coil-cut switches to cut to alternate coils so as to have hum cancellation with both split coils selected?
|
|