Post by dreamert on Feb 23, 2011 10:51:59 GMT -5
Hey folks,
Since I played around quite a bit with that switch and found out I had to rethink my whole wiring after finding out it wouldn't fit in the guitar body the way I had planned it, here is all my wisdom with that switch. Someone told me there is about zilch out there about it so, all mashed up and digested for you to use.
Nice switch by the way, just laid out a bit differently, well built and very easy to solder on.
Just be careful on how it is going to be installed, whether your 'position 1' fits with lug #1 or lug #8, that will bring you do a different pinout table. That's what I had to figure out once I had to flip it 180 degress to fit the cavity...
Cheers :guitarplayer2:
Since I played around quite a bit with that switch and found out I had to rethink my whole wiring after finding out it wouldn't fit in the guitar body the way I had planned it, here is all my wisdom with that switch. Someone told me there is about zilch out there about it so, all mashed up and digested for you to use.
Nice switch by the way, just laid out a bit differently, well built and very easy to solder on.
Just be careful on how it is going to be installed, whether your 'position 1' fits with lug #1 or lug #8, that will bring you do a different pinout table. That's what I had to figure out once I had to flip it 180 degress to fit the cavity...
Cheers :guitarplayer2:
