Post by newey on Aug 30, 2011 14:20:03 GMT -5
I'm rewiring my travel guitar, and referenced this diagram of the original Esquire wiring, using the std Fender 3-way switch. (My project is different, I just wanted to check component values.)
Since we sometimes get Esquire wiring questions, I thought I'd include it here for reference. This is courtesy of Jurgens at the TDPRI forums:
Note that the readily-found 0.047µf cap is equivalent (within std tolerances) to the stated value of 0.050µf
Sorry for the size issues, photobucket isn't cooperating lately
If you can't read it, this gives:
1) "Fixed Bassy Tone" (Leo's infamous "Jazz" setting)
2) With std Vol and Tone controls
3) Volume control only, no tone control (a brighter sound)
Since we sometimes get Esquire wiring questions, I thought I'd include it here for reference. This is courtesy of Jurgens at the TDPRI forums:
Note that the readily-found 0.047µf cap is equivalent (within std tolerances) to the stated value of 0.050µf
Sorry for the size issues, photobucket isn't cooperating lately
If you can't read it, this gives:1) "Fixed Bassy Tone" (Leo's infamous "Jazz" setting)
2) With std Vol and Tone controls
3) Volume control only, no tone control (a brighter sound)