Conductive tape?

[png123]

Hey guys,
I was looking for some copper tape to shield my guitar and i found the following;

www.banzaieffects.com/Copper-foil-61mm-adhesive-1m-pr-20212.html

Is the tape conductive (ie; the glue conductive),
Or do i still have to solder it all together?

[ranchtooth]

This is conductive, and in most cases with copper tape it is conductive on both sides, so all you gotta do to make a connection is overlap the tape! To do a test, grab yourself a multimeter and check the resistance on the tape, both sides. It should have a very low resistance. If the meter does nothing there is infinite resistance and therefore it is not a conductor! This little trick showed me that simple foil duct tape from home depot can be used for shielding!!!