dannykaya
Rookie Solder Flinger
Posts: 2
Likes: 0
|
Post by dannykaya on Dec 30, 2008 13:09:23 GMT -5
Hi guys,
I just spent a lot of time rewiring my Gibson SG, and I plugged it into my amp, and no output! What could be wrong here? Could it just be a cold solder joint? If anybody could help, I'd be reallly happy. Thanks in advance
|
|
dannykaya
Rookie Solder Flinger
Posts: 2
Likes: 0
|
Post by dannykaya on Dec 30, 2008 15:12:23 GMT -5
I figured it out! in case anybody else has the same problem, heres what was wrong with mine. i soldered the output cable to the ground part of the swith. on the gibson right angle switch, you want to solder the output to the bottom two leads. this may sound really simple, but it had me stumped for hours! if anybody needs help with gibson SG wiring, gimme an email at dannykaya@gmail.com. i would love to use my experience to help others
|
|
|
|
Post by cynical1 on Dec 30, 2008 15:26:10 GMT -5
...i would love to use my experience to help others... Very noble soul. Welcome to the party, and as always...glad we could help... Happy Trails Cynical One |
|
|
|
Post by ChrisK on Dec 30, 2008 22:11:35 GMT -5
Welcome a'board. That's why we're all here. In lieu of emailing, one can feel free to post one's queries here for all to see and learn from.  |
|
