imdamuffin
Rookie Solder Flinger
Posts: 3
Likes: 0
|
Post by imdamuffin on Nov 23, 2011 19:23:36 GMT -5
Hi all, I've recently purchased a lace sensor dually red-red which I plan on putting into my flying v, which currently has 2 coil tap switches and a reverse phase switch. Unfortunately, i cant figure out the wire codes for the pickup. They have two full orange and two full white leads, the pickups do not seems to be connected at all, it just looks like two single coils sitting next to eachother. How do I wire this so that I can get just one coil? Can anyone help me with these crazy color codes I've checked the Lace site and can't find anythin
|
|
|
Post by asmith on Nov 24, 2011 3:49:03 GMT -5
Humbuckers are two single coils sitting next to each other.
I did some Googling but it's too early in the morning to find anything worthwhile. My best guess: connect one of the orange wires and one of the white wires together to get your two single coils in series with each other, forming a humbucker.
That connection will also need to head off to a 'coil tap switch' in order for that gizmo to function.
|
|