|
Post by JFrankParnell on Mar 3, 2014 18:08:11 GMT -5
So, my goal here is to have the tone control out of circuit for the bridge pup. The goal being to have the tone turned down to like 5 for the N &M pups, but full treble tone for the bridge. Have I achieved this, with this diagram? First, lets make sure I have the basic scheme correct, but next, I want to talk about how to incorporate the 'Asmith Cap' from this thread: guitarnuts2.proboards.com/thread/5677/add-series-any-combo?page=4&scrollTo=54724I was thinking about having a switch that could add the tone *back* into the bridge and then a switch for Asmith Cap in/out. It would be fine, to have the Asmith acting on all pups, if there was a switch.
|
|
|
Post by ashcatlt on Mar 3, 2014 19:13:42 GMT -5
I think you need to move the ABC connections to CDE. Then it works, but keep in mind that the Tone is only actually removed from the circuit in the Bridge only position.
|
|
|
Post by JFrankParnell on Mar 3, 2014 19:47:32 GMT -5
I added the 1-5 to the pup legend. 1 is bridge, yes? Therefore, the abc/cde looks correct to me? Yeah, that's cool to have the tone in for any other combo. I just want a bright lead sound on bridge.
|
|
|
Post by newey on Mar 3, 2014 23:25:29 GMT -5
JFP-
I think you have it right, it's just the weird switch layout of that EYB Megaswitch that's thrown ash off. With Bridge = 1, neck = 5, it checks out.
|
|
|
Post by ashcatlt on Mar 4, 2014 8:37:12 GMT -5
Yeah, I didn't see the numbers. Figured it just connected lugs in the same order on both sides of the switch. How dey do dat?
|
|
|
Post by JFrankParnell on Mar 4, 2014 10:41:55 GMT -5
|
|
|
Post by JFrankParnell on Mar 5, 2014 14:15:29 GMT -5
|
|