unrealize
Rookie Solder Flinger
Posts: 2
Likes: 0
|
Post by unrealize on Sept 26, 2017 16:09:04 GMT -5
Hey. I bought a couple 81c's to have have around in need when budget wasn't that kind to me. I never received any wiring diagram or their 'basic wiring instructions' so I have nothing but a guess as to what the wires from the pup are. I made a picture and I was hoping that some kind soul could confirm for me if I'm on the right track here, or help me out if I'm totally at a loss. Thank you!
|
|
|
Post by newey on Sept 26, 2017 21:56:32 GMT -5
Well, if we assume that these Dragonfire 81Cs are essentially clones of EMG 81s, then I'd say you're on the right track. But, it's all too easy to put the "butt" in "assumptions" . . . A quick email to Guitarpartsonline would probably yield the needed degree of certainty. EDIT: I apologize for being remiss in my duties. Hello and Welcome to G-Nutz2!
|
|
unrealize
Rookie Solder Flinger
Posts: 2
Likes: 0
|
Post by unrealize on Sept 28, 2017 16:53:20 GMT -5
Thank you very much! That helped me a lot, and it was also nice to confirm that I was on the right track.. Cheers!
|
|
Deleted
Deleted Member
Posts: 0
Likes:
|
Post by Deleted on Sept 30, 2017 11:57:17 GMT -5
Thank you very much! That helped me a lot, and it was also nice to confirm that I was on the right track.. Cheers! There are plenty of diagrams out there, pay attention to the wiring of the jack, EMG's diagrams are nice and detailed shows where sleeve/tip/ring are and what is connected where (ring : battery ground, sleeve : circuit ground, tip : hot)
|
|