jbonil1
Rookie Solder Flinger
Posts: 1
Likes: 0
|
Post by jbonil1 on May 28, 2006 13:50:40 GMT -5
I bought a fernandes sustainer about four months ago and took it with my guitar to a luthier for the installation. Though he did a great routing job he couldn't figure out the wiring, since the schematics for the sustainer are for a three way toggle switch (Gibson type) and my guitar has a three way lever action switch (tele type), 1 volume, no tone, bridge humbucker and neck pickup the humbucking sustainer. I tried contacting the fernandes customer service but all they did was send me the same schematics that came with the sustainer. What I need is help in converting the wiring from this (page 3, second schematic) fernandesguitars.com/manuals/FSK101.pdf to this (enclosed switch) www.stewmac.com/wiring101/diagrams_for_3and5_way.html I think this might help (les paul melody maker one) www.stewmac.com/wiring101/3way_toggle_switches.html I fixed the wiring he did and got the sustainer to work(it wasn't working) but I need help with the wiring in the switch so I can get it to switch between bridge and neck, since it doesn't switch.
|
|
|
Post by Mike Richardson on May 28, 2006 23:26:38 GMT -5
On the enclosed switch, connect the two "zeros" together. The Yellow, White and Blue wires will connect to them. Green will go to "2" and "3" on one side. Purple will go to "1" and "2" on the other. I think that'll work. If not, we'll try again.
|
|