Please help with my wiring/pickup question!

[cgorzney02]

Hey y’all I’m new here. I want to change the pickups in my Warlock but it’s my first time doing so, and I ran into an issue based on the pickups I’ve chosen. Here’s what I’m working with: I have a stock B.C. Rich Warlock Revenge and I want to switch the neck pickup for an EMG H4A (passive) and the bridge for a Seymour Duncan Distortion TB-6. (The guitar has a 3 way switch) My first question would be is it possible to clip the connector wire on the solderless EMG pickup to then solder it? If so how? Also if there’s anyone who is capable of making wiring a diagram for this situation I would greatly appreciate it!

[ssstonelover]

See if this works (assumes Warlock 2 HB tone/volume wiring is close to standard wiring, which it should be).
Note the wire colors on the neck pickup are EMG and don't match with the Duncan bridge pickup you are installing, so follow the suggestion I have to get it right.