jray
Rookie Solder Flinger
Posts: 4
Likes: 0
|
Post by jray on May 22, 2006 10:25:33 GMT -5
hi , now i`ve sanded the bar bridge and the nut of my electric guitar , these part are not installed again , but i would like to know if my guitar could come out-of-tune .And i will say that my keys are good , so i asked this question because if somebody say me everything... i will change the parts... or you know
|
|
|
|
Post by CheshireCat on May 23, 2006 2:10:24 GMT -5
hi , now i`ve sanded the bar bridge and the nut of my electric guitar , these part are not installed again , but i would like to know if my guitar could come out-of-tune .And i will say that my keys are good , so i asked this question because if somebody say me everything... i will change the parts... or you know "bar bridge"?  |
|
|
|
Post by sumgai on May 23, 2006 3:21:58 GMT -5
Chesh,
Think pre-ToM here.
sumgai
|
|
|
|
Post by CheshireCat on May 23, 2006 3:52:56 GMT -5
Chesh, Think pre-ToM here. sumgai What, like the PRS bridges? Link? |
|
|
|
Post by sumgai on May 23, 2006 16:20:08 GMT -5
Chesh, Pretty good image here. Bear in mind that this is a brand new part, older stuff looks different, but the idea is the same - it's just a bar across the face of guitar that acts as a bridge. sumgai |
|
|
|
Post by CheshireCat on May 23, 2006 18:39:36 GMT -5
Chesh, Pretty good image here. Bear in mind that this is a brand new part, older stuff looks different, but the idea is the same - it's just a bar across the face of guitar that acts as a bridge. sumgai Well, apart from being grossly overpriced, how in blazes do you "sand that down"!?! |
|
|
|
Post by UnklMickey on May 23, 2006 18:54:09 GMT -5
...apart from being grossly overpriced... Chesh, i don't know about the rest of whats going on with this thread, but i'm with you on the overpriced part. instead of the $100+ for that thing, someone could pay $15 for this one: store.guitarfetish.com/lespajuwrinb.htmlbut then again, it wouldn't be a Gibson. (i think keeping the extra $90 in someone's pocket could make that easy to accept.) unk |
|
|
|
Post by CheshireCat on May 23, 2006 19:20:48 GMT -5
...apart from being grossly overpriced... Chesh, i don't know about the rest of whats going on with this thread, but i'm with you on the overpriced part. instead of the $100+ for that thing, someone could pay $15 for this one: store.guitarfetish.com/lespajuwrinb.htmlbut then again, it wouldn't be a Gibson. (i think keeping the extra $90 in someone's pocket could make that easy to accept.) unk Indeed. When they mark up a $3 pot to $10 just because it's a "Gibson", that's when I think someone is just waaaaaaay too full of themselves. |
|
|
|
Post by dunkelfalke on May 24, 2006 1:55:53 GMT -5
i don't know about the rest of whats going on with this thread, but i'm with you on the overpriced part. holy sh1t! a schaller finetuning bridge is priced at less than 60 euros  |
|
|
|
Post by ChrisK on May 25, 2006 16:49:31 GMT -5
Yep, I gots a gold Schaller at GC fer $23 during a clearance. Figured that I can use the Gotoh 501 drilling, so just waiting to launch on a body.
unk,
The second cast bridge alluded to "grub screws". Is flying lunch afoot?
|
|
|
|
Post by UnklMickey on May 25, 2006 17:36:20 GMT -5
i'm not sure Chris,
either that, or they're talking about an X-rated lawn problem...................ew!
|
|
