stratotak
Apprentice Shielder
Posts: 49
Likes: 0
|
Post by stratotak on Oct 1, 2008 22:57:24 GMT -5
Is this way a good way to handle my ground wiring..??I have one volume and a 3-way Tele switch and 2 humbuckers..the ground wire from jack is split into a "Y" near pot..one end connects to volume pot ground .. the other end is where i connect all other pickup and string grounds to .and solder them together and tape end up...Nothing gets soldered to top of pot..just the ground wire and hot from jack are connected to pot ..and all grounds connect to the wire i split from ground wire from jack..its soldered and taped up..This isnt a ground loop is it??Its quiet and there is no hum except when Im to close to my PC CRT monitor..
|
|