|
Post by ChrisK on Oct 15, 2008 18:57:35 GMT -5
The reference position is how each should be represented in a design since these are unique for each type. Only the terminals need to be shown in a schematic.
|
|
|
Post by ChrisK on Oct 29, 2008 18:42:49 GMT -5
Fun with switches, take 1. Series_Single_Parallel switching with a DP3T Center-ON switch (and also with a blend pot or dual volume pots).
|
|
|
Post by ChrisK on Oct 31, 2008 22:25:57 GMT -5
Fun with switches, take 2. Binary Tree Switching (with series when both "A" & "B" are OFF).
|
|