Post by Deleted on May 19, 2019 19:26:51 GMT -5
Two Push Pull Switches,
One to change the Phase of the Second Humbucker
and one to link them together
Hexadecimal Switch that changes the Capacitor from 10F, 14n7F, 22nF and 26n7F on both sides
My Bleed Circuit that is Controlled by a Selection Switch (which I'm going to have to re-draw as i dont know what i was on the first time i did it) It will become the other side of the Disc to the 2PSW (2Pickup Switch) So all PCB double up as much as i can.
