|
Post by frets on Sept 14, 2021 13:26:19 GMT -5
Hi Guys😸😸😸, Ive not posted a diagram here in a while but I just put this in an HSS and find it to be a frequently utilized schematic that most guys like. You’ll note that the two resistors are 470k. But I’ve also used 510k. What sounds nice on this scheme is the different cap valued Bridge and Middle/Neck Tones. I went with a 47/15nF split but a 22/15nF split is nice too. Depends upon the brightness of the humbucker.
|
|
|
Post by newey on Sept 14, 2021 14:32:14 GMT -5
Nice, frets, but your legend is wrong, it says "SW-2= 15nf bridge tone/coil split", but the diagram shows a 47nf cap on that pot, the 15nf cap is on P1 which is shown as the neck/mid tone. So, just labeled backwards.
|
|
|
Post by frets on Sept 14, 2021 15:31:36 GMT -5
Oops, you all know me🙀. I’ll fix it. I can’t do one without making some silly mistake. Thanks Newey, I’ll get a new one up.
|
|
|
Post by frets on Sept 16, 2021 15:46:47 GMT -5
Hi Fellers, 😺 I have revised my HSS diagram with 7 sound mod and Coil Split. Thanks to Newey for catching my error.
|
|