HHH with 3 spdt and on off switch

[ashmore61]

I was hoping someone has a diagram for the wiring of one of these chinese loaded pick guards, as I know the wiring from the factory is wrong

[stevewf]

Hi!  Well, I haven't seen an off-the-shelf wiring diagram for that pickguard/harness. But since it sounds like you're ready to break out the soldering iron to fix it, then that opens many options for you.

If you want to visit those options, I'll bet that guitarnuts2 folks can help you get what you want out of that setup. They'd want to know what components are to be involved. You've already described the three SPDT toggles, and I'm guessing that the on/off switch is a momentary SPST normally-open switch.

Two things remain to be detailed:

• Selector switch. Is it a standard Strat switch, or Mayne a SuperSwitch? With a description, the folks here can help figure that out.
• Pickups. They look like Humbuckers, all three. That would give many options. Do they have two wires, two wires plus shield, or three, or four wires plus?

Or, if you want to find an off-the-shelf answer, maybe where you got it could provide some leads.

[ashmore61]

There are three humbuckers, four wires plus ground, spst push button in the output lead, and the three togles I think switch the polarity of the humbuckers. 
I have a lot of hum so I think there is a grounding issue. I have tried sorting it myself but I am lost because it all looks good.
I got it from ali express and they are not helpful with wiring diagrams.

[newey]

Jun 18, 2023 2:23:08 GMT -5 ashmore61 said:

the three togles I think switch the polarity of the humbuckers. 

Some photos of the wiring as it is now may help to sort things.