Post by doublehalfling on Oct 14, 2024 8:03:04 GMT -5
guitarnuts2.proboards.com/post/82772
The above link is a reference for what terminals are being selected for each switch position. reTrEaD did some phenomenal work there!
I'm building a '54 Les Paul in the vein of Zappa's Hot Rats goldtop, and the configuration I wanted to have is as follows:
1. Neck P90 + Middle Single, series, out of phase
2. Middle Single
3. Bridge P90 + Middle Single, series
4. Neck P90
5. Bridge P90 + Neck P90, parallel
6. Bridge P90
I've wired up Freeway's 6-way tele switch, but I just followed the diagram, so I'm not sure what the logic of the switch terminals are when it comes to reversing phase, or series/parallel switching, etc.
I like to theorise these things endlessly before actually ordering parts, because the excitement of the possibilities helps move the build along, so I don't have any of these parts as of yet, I'm just familiar with the possibilites of the switches, but not the nitty gritty of the switches logic and wiring it up outside of the preprepared schematics they provide on their website.
If anyone has used this switch for custom wiring jobs and is familiar with how things should be connected for any of the above, then I'd be delighted and very grateful!
Also for reference, just going with a master volume (possibly with a phase reversal for the middle pickup for extra options) and master tone, but its the toggle switch thats a bit of a mystery to me, the two pots are fine.
The above link is a reference for what terminals are being selected for each switch position. reTrEaD did some phenomenal work there!
I'm building a '54 Les Paul in the vein of Zappa's Hot Rats goldtop, and the configuration I wanted to have is as follows:
1. Neck P90 + Middle Single, series, out of phase
2. Middle Single
3. Bridge P90 + Middle Single, series
4. Neck P90
5. Bridge P90 + Neck P90, parallel
6. Bridge P90
I've wired up Freeway's 6-way tele switch, but I just followed the diagram, so I'm not sure what the logic of the switch terminals are when it comes to reversing phase, or series/parallel switching, etc.
I like to theorise these things endlessly before actually ordering parts, because the excitement of the possibilities helps move the build along, so I don't have any of these parts as of yet, I'm just familiar with the possibilites of the switches, but not the nitty gritty of the switches logic and wiring it up outside of the preprepared schematics they provide on their website.
If anyone has used this switch for custom wiring jobs and is familiar with how things should be connected for any of the above, then I'd be delighted and very grateful!
Also for reference, just going with a master volume (possibly with a phase reversal for the middle pickup for extra options) and master tone, but its the toggle switch thats a bit of a mystery to me, the two pots are fine.