hdcorvette
Rookie Solder Flinger
Posts: 5
Likes: 0
|
Post by hdcorvette on Nov 14, 2006 0:50:08 GMT -5
After reading QTB, I decided to shield my guitar. I noticed in the article under materials needed, a reference to copper foil from Michaels craft store. I purchased the product, which were sheets of thin 100% copper leaf material. I sprayed the cavities with adhesive and applied the sheets. This material seems quite thin. Has anyone had experience with this material? Is it effective? Thanks
|
|
phy7ajw
Rookie Solder Flinger
Posts: 17
Likes: 0
|
Post by phy7ajw on Dec 2, 2006 6:35:56 GMT -5
The thin stuff is good. I've done QTB with both thin copper tape and thicker copper foil used for engraving - the only difference is that the thick stuff is really hard to shape to the cavities wheras the thin foil just pushes in nicely.
|
|