|
Post by simes on Nov 11, 2005 5:31:32 GMT -5
Hello.
I am considering building myself a T-type guitar. I would probably only make the body myself, since a neck might be better acquired ready-made for a first project, but you never know.
Does anybody know where I can get a template or reasonably accurate dimensions for a "T" body? What about the neck, just in case? Obviously I don't want to pay for it.
If I put in a 22 fret neck, presumably allowance would have to be made in the joint with the body.
Thanks,
Simes
|
|
|
Post by Trey on Nov 11, 2005 6:48:33 GMT -5
Stewmac sells designs and plans for most popular stringed instruments. www.stewmac.comClick on Books and Plans... EDIT: Just read the "I don't wanna pay for it part", good luck with that can't help ya there. It's probably worth it to pay $20 for accurate plans rather than struggle with semi-accurate meausrements.
|
|
|
Post by Runewalker on Nov 12, 2005 10:28:20 GMT -5
These are reguarily in the Ebay section on guitar/parts/luthier section
|
|
|
Post by pollyshero on Nov 12, 2005 14:37:25 GMT -5
I'm in the process of assembling a Tele - If you email me with your address I'll be happy to send you a tracing & some measurements.
|
|